Weslo WLEX71407.0 User Manual page 8

6. Attach the Seat (12) to the Seat Brackets (14, 15)
with four M6 x 35mm Hex Screws (61) and four M6
Washers (54).
7. Have another person hold the Upright (13) near the
front of the Frame (1). Locate the wire tie (see the
inset drawing) in the Upright. Tie the lower end of the
wire tie to the Wire Harness (27). Next, pull the upper
end of the wire tie upward out of the top of the
Upright. Then, untie and discard the wire tie.
Tip: Start all screws before tightening any of
them. Also, be careful to avoid pinching the wires
during this step. Insert the Upright (13) into the Frame
(1). Attach the Upright to the Frame with four M8 x
16mm Button Screws (34) and four M8 Split Washers
(42).
6
14
54
61
7
34
42
1
8
12
15
61
54
27
13
34
42
34
42
Wire Tie
27
54