Page 1
Model No. WLEX70907.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE DO NOT CONTACT THE STORE.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise cycle before using your exercise cycle. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
BEFORE YOU BEGIN Thank you for selecting the new WESLO PURSUIT ® us. The model number and the location of the serial E 28 exercise cycle. The PURSUIT E 28 exercise number decal are shown on the front cover of this cycle blends advanced engineering with contemporary manual.
ASSEMBLY To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480. Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack- ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex tools, assembly requires your own Phillips screwdriver and adjustable wrench...
Page 6
3. Remove all parts from the Pivot Axle (3). Insert the Pivot Axle into the Frame (1). Align the hole in the center of the Pivot Axle with the hole in the center of the Frame. Tighten an M5 x 10mm Machine Screw (32) into the Frame and the Pivot Axle.
Page 7
5. Attach the Seat (11) to the Seat Post (10) with four M8 Nylon Locknuts (9) and four M8 Spring Washers (8). Note: The Nylon Locknuts and Spring Washers may be pre-attached to the Seat. Press the Frame Bushing (4) into the Frame (1). (Note: The Frame Bushing may be pre-assembled.) Next, insert the Seat Post (10) into the Frame.
HOW TO USE THE EXERCISE CYCLE HOW TO ADJUST THE SEAT BATTERY INSTALLATION For effective exer- Before the console can be operated, one “AAA” bat- cise, the seat must tery must be installed. If you have not installed a bat- be at the proper tery, see assembly step 4 on page 6.
Page 9
HOW TO OPERATE THE CONSOLE Time, speed, distance, or Note: If there is a sheet of clear plastic on the face of calories the console, remove it before operating the console. mode—To select one of 1. To turn on the power, press the mode button or these modes simply begin pedaling.
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise cycle reg- HOW TO ADJUST THE RESISTANCE STRAP ularly. Replace any worn parts immediately. If there is not enough pedaling resistance when the The exercise cycle can be cleaned with a soft, damp resistance knob is turned to the highest setting, the cloth.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning exercise, which is activity that requires large amounts this or any exercise program, consult your of oxygen for prolonged periods of time. For aerobic physician.
Page 12
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...