Fitting A Child Seat - Volvo S60 Owner's Manual

WARNING!
If an integrated booster cushion has been
subjected to a major load, such as in
conjunction with a collision, the entire
booster cushion must be replaced. This
includes the seatbelt, complete with bolts.
Even if the booster cushion appears to be
undamaged, it may not afford the same
level of protection. The booster cushion
must also be replaced if it is heavily worn.

Fitting a child seat

Volvo has child safety products that are
designed for and tested by Volvo.
When using other products that are available
on the market, it is important to read the fitting
instructions included with the product.
• Do not attach the straps for the child seat
to the horizontal adjustment bar, springs,
rails or beams under the seat. Sharp
edges can damage the straps.
• Allow the back of the child seat to rest
against the dashboard. This applies to
cars without a passenger airbag, or where
the airbag is deactivated.
• Never place the child seat in the front seat
if the car is equipped with an activated
front passenger airbag. If problems arise
when fitting child safety products, contact
the manufacturer for clearer instructions.
8. For information on activated/deacti-
vated airbag (SRS) see page 17.
8
Safety
OV