Page 1
With Universal Dock for iPod ® Model No. PFTL78807.1 USER'S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction. If you have...
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Page 4
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and switch the reset/off cir- DANGER: cuit breaker to the off position when the Always unplug the power treadmill is not in use.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM ® ing this manual, please see the front cover of this man- 8.5 PERSONAL FITNESS TRAINER treadmill with ual. To help us assist you, note the product model Universal Dock for iPod. The 8.5 PERSONAL number and serial number before contacting us.
2 1/2” Bolt (37)–2 ASSEMBLY 3 1/2” Bolt (45)–4 Wheel Nut (32)–2 To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not Handrail Bolt (64)–4 dispose of the packing materials until assembly is completed.
Page 7
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Hole Remove and discard the two indicated bolts (A) and the shipping bracket (B).
Page 8
4. Set the Right Upright Spacer (79) on the Base (83). Be careful not to pinch the Upright Wire (38). With the help of a second person, hold a Bolt Spacer (90) inside the lower end of the Right Upright (78). Insert a 3/8" x 5" Bolt (6) with a 3/8"...
Page 9
7. Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Hold the Right Handrail (95) near the con- sole assembly. Next, insert the console wire into Console Wire the large hole in the Right Handrail and out of the top as shown.
Page 10
10. Attach the console assembly with six 5/16" x 1 1/4" Bolts (7) and six 5/16" Star Washers (10) (only three are shown). Console Assembly See steps 4 and 6. Tighten the 3/8" x 5" Bolts (6). 11. Identify the Storage Latch (53). Remove the tie from the end of the tube.
Page 11
13. Press the Left Accessory Tray (99) and the Right Accessory Tray (106) into the Console Base (91). 14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with high- performance lubricant.
Page 13
CONSOLE DIAGRAM Integrated Universal Dock for iPod Navigation Buttons FEATURES OF THE CONSOLE run with the Marathon workout. iFIT workouts automati- cally control the treadmill while the voice of a personal The treadmill console offers an impressive array of trainer coaches you and through every step of your features designed to help you get the most from your workout.
Page 14
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
Page 15
4. Change the incline of the treadmill as desired. • The number of laps you have completed. To change the • The incline setting of the treadmill. Note: The in- incline of the cline setting will be displayed only when the in- treadmill, press cline setting changes.
Page 16
7. Turn on the fan if desired. 6. Measure your heart rate if desired. Before using the The fan features high, low, and auto speed set- handgrip pulse tings. Press the Fan button repeatedly to select a sensor, remove fan speed or to turn off the fan. When the auto the clear plastic mode is selected, the speed of the fan will auto- film from the...
Page 17
HOW TO USE A PRESET WORKOUT A profile of the speed settings of 1. Insert the key into the console. the workout will appear in the dis- See HOW TO TURN ON THE POWER on page play. A small arrow below the profile will indi- 2.
Page 18
HOW TO USE AN IFIT CARD During the workout, a personal trainer will guide you through the workout. You can select an audio setting 1. Insert the key into the console. for your personal trainer (see THE INFORMATION MODE on page 19). See HOW TO TURN ON THE POWER on page If the speed or incline setting for the current seg- ment is too high or too low, you can manually over-...
Page 19
HOW TO USE THE STEREO SOUND SYSTEM You can select an audio setting if desired. When you use an iFIT card, a personal trainer will guide you This product has been designed specifically to work through your workouts. If you select the “On” setting, with iPod and has been certified by the developer to the personal trainer will give you detailed instructions.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord.
Page 21
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be neces- sary to push the frame forward as you pull the knob to the left.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 23
Remove the three #8 x 3/4" Screws (1) and care- fully pivot the Hood (61) off. Locate the Reed Switch (71) and the Magnet (50) on the left side of the Pulley (51). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and 1/8 in.
Page 24
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn;...
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST—Model No. PFTL78807.1 R0108A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Front Roller/Pulley #8 x 1" Tek Screw 15 1/2"...
Page 27
Key No. Qty. Description Key No. Qty. Description Console Ground Wire 3/8" Jamnut Motor Bracket Incline Stop Bracket 3/8" x 4" Bolt 3/8" Motor Star Washer Lift Motor Spacer – 12" Blue Wire, 2F #8 x 2" Screw – 10" Blue Wire, M/F Right Accessory Tray –...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...