Removal
1. Remove Pinion Assembly/Rotor/Field/Pinion/
Clutch, Clamp and Clutch Housing, as in-
structed in manual 309890.
2. Fig. 6. Disconnect all necessary wiring.
3. Fig. 7. Remove two locknuts (7) and screws (6)
from base of engine.
4. Lift engine carefully and place on work bench.
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
2
Fig. 6
Engine
Green
97
1
To the field
2
To the engine
7
1
ti1835
6
7
Fig. 7
Installation
1. Lift engine carefully and place on cart.
2. Fig. 7. Install two screws (6) in base of engine and
secure with locknuts (7). Torque to 200 in-lb (22.6
NSm).
3. Fig. 6. Connect all necessary wiring.
4. Install Pinion Assembly/Rotor/Field/Pinion/
Clutch, Clamp and Clutch Housing, as
instructed in manual 309890.
8710B
309412
11