Toyota 4Runner 2003 Operating Manual page 51

CAUTION
D
Do not allow passengers to ride on
the flattened seat while driving; use
the seat in the normal position.
D
After putting back the seat,
pushing the seat and seatback for-
ward and rearward to make sure it
is secured in place. Be certain to
replace head restraint.
'03 4Runner_U (L/O 0211)
—Flattening seatbacks
(power seat)
try
1. Remove the head restraint. Push the
seat position adjusting switch for-
ward to slide the seat further for-
ward than the front–most position.
2. Move the seatback angle adjusting
switch backward to flatten the seat-
back.
After returning the seat to its original
position, be certain to replace the head
restraint.
2003 4RUNNER from Oct. '02 Prod. (OM35804U)
45