Update Software; Check Software Version; Update Software From The Network; Update Software From A Usb Device - Philips HTS8160B User Manual

7 Update software

To check for new updates, compare the current
software version of your home theater with
the latest software version (if available) on the
Philips web site.

Check software version

1
Press , select [Settings] , and then press
OK .
2
Select [Advanced Setup] > [Version
Info.] , then press OK .
»
The software version is displayed.
Update software from the
network
1
Prepare the internet connection (see
'Connect to the internet' on page 16 ) .
2
Press and select [Settings] .
3
Select [Advanced Setup] > [Software
Download] > [Network] .
»
If an upgrade media is detected, you
are prompted to start or cancel the
update.
4
Follow the instruction on the TV to
conÀ rm the update.
»
When the update is complete, the
home theater automatically switches
to standby.
5
Disconnect the power cord for a few
seconds and then reconnect it.
Update software from a USB
device
1
Check for the latest software version on
www.philips.com/support.
• Search for your model and click on
'software&drivers'.
2
Create a folder named 'UPG' in your USB
device.
3
Download the software into 'UPG' folder.
4
Unzip the software in the 'UPG' folder.
5
Connect the USB device to the home
theater.
6
Press and select [Settings] .
7
Select [Advanced Setup] > [Software
Download] > [USB] .
8
Follow the instructions on the TV to
conÀ rm the update.
»
When the update is complete, the
home theater automatically switches
to standby.
9
Disconnect the power cord for a few
seconds and then reconnect it.
Caution
•
Do not turn off the power or remove the
USB device when the software update is in
progress because you might damage the home
theater.
EN 31