Change Preferences - Philips HTS8160B User Manual

Change preferences

Select the menu language
1
Press , select [Settings] , and then press
OK .
2
Select [Preference Setup] > [OSD
Language] , then press .
3
Select the menu language, then press OK .
Note
• If your home theater is connected through
HDMI to an HDMI CEC compliant TV, it
switches automatically to the menu language
on the TV.
Use parental control
You can restrict access to discs that are
recorded with ratings. When access to a disc
is restricted, use your personal identiÀ cation
number (PIN) to play the disc.
Tip
•
To play all discs irrespective of the rating,
select a parental control level of '8' for DVDs
and Blu-ray discs.
1
Press , select [Settings] , and then press
OK .
2
Select [Preference Setup] > [Parental
Control] , then press .
3
Enter your PIN or press ' 0000 ' on the
number buttons of the remote control.
4
Press to select a rating level from 1 to
8, then press OK .
Note
•
Some discs are not recorded with ratings but
display a rating on the label. You cannot use
parental control on these discs.
Set or change a PIN
1
Press , select [Settings] , and then press
OK .
2
Select [Preference Setup] > [Change
PIN] , then press OK .
3
Enter your PIN on the number buttons of
the remote control, then press .
• If you do not have a PIN or if you
have forgotten your PIN, enter
' 0000 '.
4
Enter a new PIN, then press .
5
Enter the same PIN again to conÀ rm.
6
Select [ConÀ rm] , then press OK .
Change the brightness of the display
panel
1
Press , select [Settings] , and then press
OK .
2
Select [Preference Setup] > [Display
Panel] , then press .
3
Select the brightness of the display panel,
then press OK .
• [100%] - Brightest
• [70%] - Medium
• [40%] - Dimmest
Enable auto standby
To save energy, you can automatically switch
the home theater to standby after 30 minutes
of inactivity (for example, in pause or stop
mode).
1
Press , select [Settings] , and then press
OK .
2
Select [Preference Setup] > [Auto
Standby] , then press .
3
Select an option, then press OK .
• [On] - Enable auto standby.
• [Off] - Disable auto standby.
EN 27