Ltx Series Rac Tip Selection Charts - Graco 288046 Instructions - Parts Manual

LTX Series RAC Tip Selection Charts

LTX Series RAC Tip Selection Charts
For use with G40 RAC Housing
* Fluid Output, fl oz/min
Orifice Size in. (mm)
0.009 (0.229)
0.011 (0.279)
0.013 (0.330)
0.015 (0.381)
0.017 (0.432)
0.019 (0.483)
0.021 (0.533)
0.023 (0.584)
0.025 (0.635)
0.027 (0.686)
0.029 (0.737)
0.031 (0.787)
* Tips are tested in water.
✖ Pattern width measured without airflow.
LTX Reverse-A-Clean (RAC) Spray Tips
• LTX RAC spray tips include a metal fluid seat and rubber fluid seal.
• G40 RAC conversion kits are available. See page 32.
G40 RAC Tip
Guard/Air Cap Assy.
F . 23
IG
* Included with the LTX RAC spray tip.
† Optional acetal fluid seal 248936 (pack of 5) available.
32
(lpm)
at 2000 psi
(14.0 MPa, 140 bar)
11.2 (0.33)
16.6 (0.49)
23.3 (0.69)
30.8 (0.91)
39.5 (1.17)
49.7 (1.47)
60.5 (1.79)
72.7 (2.15)
85.9 (2.54)
100.0 (2.96)
115.6 (3.42)
131.8 (3.90)
Housing
* Tip Cylinder
✖ Maximum Pattern Width at 12 in. (300 mm)
4 to 6 6 to 8
(150) (200)
209 309
211 311
213 313
215 315
217 317
219 319
321
TI8125a
8 to 10 10 to 12
(250) (300)
411 511
413 513
415 515
417 517
419 519
421 521
423 523
525
527
531
*†Fluid
Seal
* Fluid
Seat
12 to 14
(350)
615
617
619
621
623
625
627
629
631
311052E