Toyota Tacoma 1998 Operating Manual page 93

Hide thumbs Also See for Tacoma 1998:
Table of Contents

Advertisement

If the indicator light does not go off when
you shift the transfer into "H2", drive
straight ahead while accelerating or decel-
erating, or drive in reverse.
With A.D.D.
To shift from "H2" to "H4", reduce your
speed to less than 80 km/h (50 mph) and
move the front drive control lever. You
need not depress the clutch pedal.
If you have trouble shifting in cold weath-
er, reduce your speed or stop the vehicle
and reshift.
CAUTION
Never move the front drive control
lever if wheels are slipping. Stop the
slipping or spinning before shifting.
To shift from "H4" to "H2", simply move
the front drive control lever.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you shift the transfer into "H2", drive
straight ahead while accelerating or decel-
erating, or drive in reverse.
SHIFTING BETWEEN "H4" AND "L4"
To shift from "H4" to "L4", stop the
vehicle or reduce your speed to less than
8 km/h (5 mph). With your foot off the
accelerator pedal, depress the clutch ped-
al and move the front drive control lever.
To shift from "L4" to "H4", depress the
clutch pedal and move the front drive con-
trol lever.
This can be done at any vehicle speed.
'98 Tacoma (U)
(d) Shifting procedure
(lever
type
with
automatic
transmission)
SHIFTING BETWEEN "H2" AND "H4"
With free-wheeling hubs
To shift from "H2" to "H4", move the
front drive control lever. Also, engage both
the free-wheeling hubs.
This can be done when the vehicle is
stopped,
or
moving
straight
speeds of 40 km/h (25 mph) or less. If
you have trouble shifting, depress or re-
lease the accelerator pedal momentarily
while pushing the front drive control lever.
CAUTION
"
Never move the front drive control
lever if wheels are slipping. Stop
the
slipping
or
spinning
shifting.
"
Never drive with only one hub en-
gaged.
To shift from "H4" to "H2", simply move
the front drive control lever. Also, disen-
gage both the free-wheeling hubs for con-
tinued "H2" use.
This can be done at any vehicle speed.
ahead at
before
93

Advertisement

Table of Contents
loading

Table of Contents