Chassis Lubrication - Toyota Tacoma 1998 Operating Manual

Hide thumbs Also See for Tacoma 1998:
Table of Contents

Advertisement

Recommended oil viscosity:
Front
A.D.D.
SAE 75W- 90
Except A.D.D.
Above -18 C (0 F)
SAE 90
Below -18 C (0 F)
SAE 80W or 80W- 90
Rear
Above -18 C (0 F)
SAE 90
Below -18 C (0 F)
SAE 80W or 80W- 90

CHASSIS LUBRICATION

Wheel bearings:
Lithium base wheel bearing grease,
NLGI No. 2
Front drive shaft thrust bushings:
Synthetic oil and lithium soap base
chassis grease, NLGI No.1
Propeller shafts:
Spiders
Lithium base chassis grease,
NLGI No. 2
Slide yoke and double cardan joint
Molybdenum-disulfide lithium base
chassis grease, NLGI No. 2
BRAKES
Minimum pedal clearance when depressed
with the pressure of 490 N (50 kgf, 110
lbf) with the engine running, mm (in.):
72 (2.8)
Pedal freeplay, mm (in.):
3—6 (0.12—0.24)
Pad wear limit, mm (in.):
1.0 (0.04)
Lining wear limit, mm (in.):
1.0 (0.04)
Parking brake adjustment when pulled with
the force of 196 N (20 kgf, 44 lbf):
12—18 clicks
Fluid type:
SAE J1703 or FMVSS No. 116 DOT 3
STEERING
Wheel freeplay:
Less than 30 mm (1.2 in.)
Power steering fluid type:
Automatic transmission fluid
DEXRONDII or III
'98 Tacoma (U)
231

Advertisement

Table of Contents
loading

Table of Contents