Drill Master 300 User Manual page 19

Reversing or Replacing Your Diamond
Sharpening Wheel
1.
Disconnect your Drill Doctor,
then remove wheel cover.
2.
3.
4.
www.DrillDoctor.com
®
make sure machine is cool,
Use wrench supplied with your
®
Drill Doctor to lock sharpening
wheel in place.
With Phillips-head screwdriver,
remove the two screws and
wheel retainer.
Remove worn wheel by twisting
slightly and lifting wheel off
shaft. Install new wheel and
reinstall wheel retainer and
screws. Don't over-tighten
mounting screws. Remove the
wrench and replace the wheel
access cover before turning on
the machine.
17