Husqvarna 335XPT Operator's Manual page 19

8 FUEL SAFETY
(Refuelling, fuel mixture, storage.)
!
Fuel and fuel vapour are highly inflammable.
Take care when handling fuel and chain oil.
Keep away from naked flames and do not
breathe in fuel vapour.
• Never try to refuel the saw
while it is running.
• Stop the engine and let it
cool for a few minutes
before refuelling.
• Make sure there is plenty of
ventilation when refuelling
or mixing fuel (2-stroke
mixture).
• Move the saw at least 3 m
from the refuelling point
before starting it.
• Never start the chainsaw:
a) If you have spilt fuel or
chain oil on the saw.
Wipe off the spill and
allow remaining fuel to
evaporate.
b) If you spill fuel or chain
oil on yourself or your
clothes. Change your
clothes.
c) If there is a fuel leak.
Check regularly for
leaks from the
FUEL CAP and FUEL
LINES.
• Always store the chain saw and fuel away from any sources
of sparks or naked flames, e.g. machines, electric motors,
relays, switches, boilers, etc.
• Always store fuel in an approved container designed for
that purpose.
• For longer periods of storage or for transport of the saw, the
fuel and chain oil tanks should be emptied. Ask where you
can dispose of waste fuel and chain oil at your local petrol
station.
9 Never use any accessories other than those recommended
in this manual. See the sections on "Cutting equipment"
and "Technical data" .
!
The risk of accident is increased if you use the
wrong cutting equipment or a chain that is not
sharpened correctly. Using the wrong combi-
nation of bar and chain can increase the risk
of accidents!
SAFETY INSTRUCTIONS
Min. 3 m
(10 ft)
19
English –