Fluid Packing Removal - Graco 224200 Instructions-Parts List Manual

Fluid Packing Removal

1. Prepare the gun for service as instructed on page
22.
2. Remove the air cap assembly, fluid nozzle and
resistor stud and electrode as instructed on page
23.
3. Loosen the trigger screws (4) far enough to re-
move the trigger (13).
4. Remove the needle assembly (28), using the
multi-tool (62). See Fig. 16.
CAUTION
Clean all parts in non-conductive solvent compatible
with the fluid being used, such as xylol or mineral
spirits. Use of conductive solvents can cause the gun
to malfunction.
5. Check all the parts for wear or damage and
replace if necessary.
Service
13
4
Fig. 16
62
28
308131
0382A
25