FITTING OF PRESSER FEET
FITTING SHANK
AND
QUILTING SEAM GUIDE
Raise the presser bar and fit shank as
shown. (1) Insert quilting/seam guide
carefully so as not to damage the holding
spring. (2)
Raise the presser foot. Pull the one-touch
lever towards you and the foot will be
released.
Centre new foot under shank.
Lower shank until groove is directly
above and touching the pin.
Pull one-
touch lever towards you and the foot will
become engaged. (3, 4)
Shank
I
On.touch
—5---