Useful Tips When Recording From Mds To Tape - Sony MDS-S39 Operating Instructions Manual

Playing MDs
To cancel Programme Play
Press PLAY MODE repeatedly (or CONTINUE once) until
"PROGRAM" disappears when the deck is stopped.
z
You can programme the same track repeatedly
While the track number appears in the display, press
AMS as many times as you want.
z
The programme remains even after Programme Play
ends
When you press fl (or ·), you can play the same
programme again.
Notes
• The programme created by the Programme Play Function
is lost when you turn off the deck or disconnect the mains
lead. The programme is, however, recalled during timer
playback.
• The display shows "- -m - -s" instead of the total playing
time when the total playing time of the programme
exceeds 160 minutes.
Checking the track order
You can check the order of tracks in your programme
during playback or playback pause.
Turn AMS (or press = or +) during playback or
playback pause. The track numbers appear in the
order they were programmed.
Changing the track order
You can change the order of the tracks in your
programme before you start playing.
To
Erase the last track in the
programme
Add tracks to the end of the
programme
Change the whole
programme completely
22 EN
Do the following:
Press CLEAR. Each time you
press the button, the last track
will be cleared.
Do Steps 2 and 3 in "Creating
Your Own Programme."
1 Press p while the deck is
stopped.
2 Do Steps 2 and 3 in "Creating
Your Own Programme."
Useful Tips when Recording from
MDs to Tape Z
The Auto Space and Auto Pause Functions described
in this section make recording from MDs to tape more
easy.
6
Inserting blank spaces while recording to
tape (Auto Space)
The Auto Space Function inserts a 3-second blank
space between each track while recording from MDs to
tapes, allowing you to use the AMS function during
later playback.
Press A.SPACE repeatedly until "A.SPACE" appears
in the display.
To cancel Auto Space
Press A.SPACE repeatedly until "A.SPACE" disappears.
Note
If the Auto Space Function is on while recording a selection
containing multiple track numbers, (for example, a medley
or symphony), blank spaces will be inserted within the
selection whenever the track number changes.
Pausing after each track (Auto Pause)
When the Auto Pause Function is on, the deck pauses
after playing each track. Auto Pause is convenient
when recording single tracks or multiple, non-
consecutive tracks.
Press A.SPACE repeatedly until "A.PAUSE" appears
in the display.
To restart playback
Press fl (· or P).
To cancel Auto Pause
Press A.SPACE repeatedly until "A.PAUSE" disappears.
Note
If you turn off the deck or disconnect the mains lead, the
deck will recall the last setting of the Auto Space and Auto
Pause Functions the next time you turn on the deck.
A.SPACE