Windows For Workgroups - Linksys FENSK05 User Manual

Etherfast series 10/100 network in a box

Hide thumbs Also See for FENSK05:

Table of Contents

Windows For Workgroups

Windows for

Workgroups Setup

After installing the EtherFast card hardware in you com-

puter, follow the instructions below to install the

EtherFast Card's Windows for Workgroups network

driver from the card's software disk.

Before attempting the installation, you should have your

original Windows for Workgroups disks handy.

1. Locate the Program Manager. Click on Window.

Select Network and open the Network group. Double-

click on the Network Setup icon.

2. Click on the Networks button. Choose Install

Microsoft Windows Network, then click OK.

3. In the Network Setup window, click on the Drivers

button, followed by Add Adapter.

4. Choose the first option in the list: Unlisted or

Updated Network Adapter. Click OK.

When asked to supply a driver disk, insert the first

EtherFast disk into drive A and type a:\wfw311 into the

box on your screen. Click OK.

Linksys LNE100TX Fast Ethernet Adapter will appear

in the Network Adapter box. Click OK, followed by

Close.

5. When the Network Setup window reappears, click on

the Sharing button.

Table of Contents