Lip-8002/8002A Ip Phone Overview - LG-Ericsson LIP-8002 User Manual

1. LIP-8002/8002A IP Phone Overview

Your new LG-Ericsson LIP-8002/8002A Phone is an Internet Protocol (IP) phone employing Session
Initiation Protocol (SIP), the well-known open standard for establishing, managing and terminating a
communication session. LIP-8002/8002A Phone interoperates with call servers, proxies and gateways to
exchange SIP signaling messages for call control. Real-time Transport Protocol (RTP) packets deliver
voice between the end-points over a managed IP network.
Features available to LIP-8002/8002A Phone through SIP call servers are similar to those of a
conventional business telephone. In addition to the features described in this guide, your call server may
provide additional features, often using dialed feature codes. Refer to your system administrator for
further information.
The LIP-8002/8002A Phone has fixed feature buttons, flexible buttons that are configurable, and dial pad
buttons as shown in the figure below.
Setting button
Use to access the LCD menu for
display and modification of IP Phone
configuration.
Redial button
Use to dial the last
number dialed.
Mute button
Toggle microphone On
and Off.
Volume Controls
Use to adjust volume of
Ring, Handset, Headset,
and speaker.
Speakerphone button
Toggle speakerphone On and Off.
The four (4) flexible buttons access features based on the IP Phone configuration.
Refer to section 5.4 and your system administrator for further information.
LIP-8002/8002A iPECS IP Phone
Navigation Controls
Left
, use to go to the previous menu in the setting menu.
Up
, use to view Call log when phone is idle.
Down
, use to access Phone Book while phone is idle.
OK
, use to select a current item or save value in LCD Menu and
use to retrieve a hold call in the hold state.
4 Flexible button
Use to assign as feature in phone
configuration.
Dial pad
Use to dial numbers.
1
User Guide
Mode/Forward/Transfer button
In editing state, use to switch the input mode.
In idel state, use to set the call forwarding
configuration.
In call state, use to transfer your active call.
Delete/Conference button
In editing state, use to delete a letter
in front of the cursor or clear entire
string.
In call state, use to initiate, cancel or
join the conference call..