Installing Your Lip-8002/8002A Phone - LG-Ericsson LIP-8002 User Manual

2. Installing your LIP-8002/8002A Phone

The figure below shows the cable connections for your IP Phone. The LAN and desktop PC connections
employ standard category 5 LAN cables terminated with RJ-45 connectors. The LIP-8002 supports PoE
(Power over Ethernet) in accordance with the IEEE-802.1af industry standard. (The LIP-8002A doesn't
support PoE and can use only the supplied adaptor.) When connected to a PoE complaint LAN port, the
IP Phone derives power from the port. If the LAN port does not support PoE, use the AC/DC adaptor,
available separately, for connection to power. The handset connects to the base with the supplied
standard handset coiled cord. Use the chart below to make connections to the IP Phone.
1 LAN Connect the IP
2 PC Connect the IP Phone PC port to your desktop PC with an RJ-45 terminated
UTP-5 cable.
3 Power The LIP-8002 supports PoE. So, if the LAN port supports PoE, IEEE 802.3af
compliant, Class 2, the AC/DC adapter i
the IP Phone power port to the DC out of Power Adapter. Connect the Power
Adapter AC plug to an AC wall jack.
The LIP-80
to the DC out of Power Adapter. Connect the Power Adapter AC plug
wall jack.
4 Handset Connect the Handset coiled cord to the IP Phone base and handset.
Phone LAN port to the LAN wall jack with the provided LAN cable.
02A doesn't support PoE. So, must connect the IP Phone power port
3
LIP-8002/8002A iPECS IP Phone
s not required. If not supported, connect
User Guide
to an AC