Speed Number Dialing; Dnd (Do-Not-Disturb); Muting A Call; Accessing Your Voice Mail - LG-Ericsson LIP-8002 User Manual

For ipecs
Hide thumbs Also See for LIP-8002:
Table of Contents

Advertisement

3.11. Speed Number Dialing

Your LIP-8002/8002A Phone incorporates a Phone Book with up to 100 records. Refer to
information on use of the Phone Book. Each record includes a name, contact information and a Speed
number (00 to 99). When you dial a Speed number, the IP Phone initiates a call to the contact. Speed
number dialing must be enabled. Refer to your system administrator for further information.
To place a call using a Speed number:
o Dial the Speed number (00-99) for the desired contact. After a short delay, the IP Phone sends the
contact information from the Phone Book. You may dial # to set up the call immediately. If the Phone
Book has no record of the Speed number, the IP Phone sends the digits dialed to the call server for
processing.

3.12. DND (Do-Not-Disturb)

When the DND (Do Not Disturb) feature is enabled and activated, the IP Phone will not notify you of an
incoming call. The IP Phone does not ring, allowing you to work without interruption from an incoming
call. The call server configuration determines routing of the incoming call while your phone is in DND.
Refer to your system administrator for further information.
To activate DND:
o Assign the DND function to the flexible button.
o While the IP Phone is idle, press the DND flexible button. When active, "Do not disturb" displays in the
LCD.
To deactivate DND:
o Press the DND flexible button again.

3.13. Muting a Call

Mute toggles the microphone of the Handset and Speakerphone Off and On. When Mute is active, the
connected party will not receive audio from the microphone.
To mute the microphone:
o Press the Mute button. "Mute" displays in the LCD..
To turn the microphone back on:
o Press the Mute button again.

3.14. Accessing Your Voice Mail

When you have a message waiting, the Message LED flashes to indicate you have new messages in
your mailbox.
To access your voice mailbox:
o Assign the Message function to the flexible button.
o Press the Message flexible button. The display indicates the number of messages waiting.
o Press OK button. The IP Phone activates the speakerphone and places a call to your voice mailbox.
To listen to your messages, follow the instructions for your voice mail system.
LIP-8002/8002A iPECS IP Phone
7
User Guide
section 4.2
for

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lip-8002a

Table of Contents