Harman Kardon DVD 20 Owner's Manual page 27

Programmed Play with DVD
Editing a Program without Screen
To edit the contents of a Playlist using the Front
Panel Information Display only rather than the
on-screen display, follow these steps:
To check a previously programmed playlist (this is
possible during any play, resume or stop mode):
I Press the CHECK Button. In Stop or Resume
mode, the first title of the disc together with
the first location number not programmed yet
will be displayed (TITLE will blink) and can be
modified and added to the playlist if desired,
see below. In play mode the first item pro-
grammed will be displayed.
I Press the CHECK Button again to step through
each of the programmed items. The Program
Sequence Number will appear on the far right
side of the front Display, next to the PR indica-
tion.
26 PROGRAMMED PLAY WITH DVD
To edit a new program, to add items to a current
program or to delete items from a program list
(possible during resume or stop mode only):
I Press CHECK until TITLE blinks in the display,
the first Location Number not programmed yet
will be displayed.
I Use the ARROW (left or right) buttons to
select title or chapter to be edited, the item
selected will blink in the display.
I Use the ARROW (Up or Down) buttons to
change the selection or enter the title/chapter
number directly with the number buttons on
the remote..
I Press PROGRAM to program the selected item
or add it to current playlist (if any).
I Press the CLEAR button to remove a program
step selected by the CHECK button. Note that
this deletion will not be confirmed by any
change in the display.
I When all steps have been programmed, press
the PLAY button to begin programmed play, or
the RETURN button to exit the program edit
function and return to normal operation.
I The program edited can be checked on screen
easily by pressing the PROGRAM button in
stop or resume mode.