Dolby Digital Or Dts (Or Other Digital Surround Mode) Connection - Harman Kardon HKTS 7 Owner's Manual

Speaker Connections
Dolby Digital or DTS ®
(or Other Digital Surround Mode)
Connection
Use this installation method for Dolby Digital,
DTS ® or other digital surround processors:
Use the line-level input jack marked "SUB" for
the Low-Frequency Effects channel. Connect this
Front
Left
– +
Surround
Left
– +
jack to the LFE output or subwoofer output
on your receiver or amplifier. Connect each
speaker to the corresponding speaker terminals
on your receiver or amplifier.
Center
–
SUB-TS7 Subwoofer
LINE LEVEL IN
SUB
Front
Left
SUB/LFE
Out
Surround
Left Center
Receiver
Make sure that you have configured your sur-
round-sound processor for "Subwoofer On."
The front left, front right, center and rear speak-
ers should all be set to "Small."
+
R L
Front
Right
Surround
Right
Front
Right
– +
Surround
Right
– +
SPEAKER CONNECTIONS 9