Data Entry; Moving The Cursor; Loading Software - Husky FS3 User Manual

Data entry

To type numbers or letters, press the appropriate
keys. To type a space, press the !
To delete characters you've just typed, press the B
key.
(BACKSPACE)
To select the characters or functions shown above
the keys, hold down either S
press the appropriate key.

Moving the cursor

Software applications will normally allow you to
move the cursor a character or line at a time, using
the arrow keys: I, J, G and H. To move the
cursor up or down several lines, use Q and R.
Resetting the FS3
Caution:
Resetting the FS3 may lose your recent
data entries. You should not need to reset the FS3 in
normal operation - use this procedure in emergency
only. Report the problem to your system provider.
If the FS3 locks up or fails to operate, you MAY
need to reset it as follows:
Refer to the previous section SETTING UP. Carry
out step 3, Reset the FS3 and step 4, Starting
MS-DOS.
If this fails, try another charged battery pack (see
Replacing the Battery). If this does not help,
contact your system provider for assistance.

LOADING SOFTWARE

Your system provider may have already loaded the
application software before issuing the FS3 to you.
Software is normally loaded onto an FS3 by
downloading files from a PC. To do this you need:
1. A suitable cable to connect between the PC and
the FS3. H approved cables are available
USKY
via your system provider.
2. A file transfer program. The H
utility, H , is provided for the FS3.
COM
For further details, please consult your system
provider or the FS3 System Developer's Guide (or
instructions provided with the application software).
key.
(SPACE)
key and then
(SHIFT)
file transfer
USKY