Using Your Headset - Blueant X3 MICRO User Manual

5. Put your headset into pairing mode by long pressing (3 seconds) the Volume up button.
You can see the blue indicator and red indicator cross blink every second.
6. Your headset is now ready to be discovered by your Bluetooth mobile phone.
7. Perform Bluetooth device discovery on your mobile phone to add a new device. It takes
a few seconds to search for and find other Bluetooth devices around you.
8. Phone display will show "X3 Micro" as found. Scroll to it and press OK to confirm that
you want to pair with it.
9. Enter passkey "1234" when your phone prompts you. The phone will now pair with the
X3 Micro.
10. If your Bluetooth phone menu supports "set as authorised" or "add to trusted devices"
then turn this feature on.
11. Short press the MFB button to connect with the phone. (If voice dialing is on it will
be activated).
Note: If your headset is not successfully paired within 2 minutes, it will automatically
leave pairing mode. Please refer to steps 4 - 10.

Using your headset

After you have paired your headset with your phone, you can make and receive a call using
your headset as long as your headset and your phone are turned on and these two devices
are within range of up to 10 m(30 ft) outdoors or up to 5 m(15 ft) indoors with no solid objects in
between. When using your headset, always make sure the Bluetooth operation mode in your phone
is on. Your headset supports both Handsfree profile and Headset profile. Accessing call functions
depends on which profile your phone supports.
Connecting, Disconnecting and Re-connecting to the headset
1. Press the MFB button once shortly to connect to this first paired phone.
(Voice dial will be activated if enabled in phone, short press MFB
2. Short press the MFB and VOL together to disconnect.
3. Press the MFB button once shortly to re-connect to this first paired phone.
To connect and make a call using voice dialing
1. Make sure your phone supports voice dialing and that voice commands have been recorded (refer
to your phones user manual for this procedure).
2. Make sure your headset and your phone are both powered on and within range of each other.
Using your headset
to cancel this).
11
12