Configuring Nat Pool; Nat Pool Configuration Parameters; Figure 9.27. Ip Pool Example - Add Two Ip Pools - Misgroup1 And Misgroup2; Figure 9.28. Ip Pool Example - Deny Quake-Ii Connection For Misgroup1 - Asus Internet Security Router User Manual

Chapter 9. Configuring Firewall/NAT Settings
Figure 9.27. IP Pool Example – Add Two IP Pools – MISgroup1 and MISgroup2
2. Associate an IP pool to firewall ACL rules – inbound, outbound or group ACL by selecting "IP
Pool" from the Source IP Type drop-down list and then choose an IP pool from the IP pool drop-
down list. In this example, IP pool is used to associate to source IP; however, it can be used to
associate to destination IP as well. As shown in Figure 9.28, MISgroup1 is not allow to play
networked game, Quake-II at all times.
Figure 9.28. IP Pool Example – Deny QUAKE-II Connection for MISgroup1
9.7.3

Configuring NAT Pool

9.7.3.1

NAT Pool Configuration Parameters

Table 9.9 describes the configuration parameters available for a NAT pool.
Field
NAT Pool Name
NAT Pool Type
76

Table 9.9. NAT Pool Configuration Parameters

Description
Enter a name for the NAT Pool.
Select the type of NAT Pool and make appropriate IP Address entries.
Internet Security Router User's Manual
Source IP Type drop-down list
IP Pool drop-down list