Special Settings; Setting Television Channels; Setting Channels Using The Search - Grundig APOLLO 42 PW 110-7505 TOP User Manual

Setup
ATS
Installation
Program table
Select
OK
and open
Installation
Program no 1
System B/G
Channel 6
Band C
Search
Fine tuning
Store
Select
and edit
Installation
Program no 1
System B/G
Channel 6
Band C
Search
Fine tuning
Store
Select
OK
and edit
28

SPECIAL SETTINGS

Setting television channels

This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.

Setting channels using the search

Press »
1
– The »MAIN MENU« appears.
2 Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Back
Select »Installation« with »P+« or »P-« and confirm with
3
Exit
»OK«.
Select »Program no« with »P+« or »P-« and set the preset
4
channel with » « or » «.
Select »Search« with »P+« or »P-« and start the search with
5
» « or » «.
– If a strong station signal is received, the search is interrupted
Back
Note:
Exit
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
6 Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Note:
To set other television stations, repeat steps
Press »
7
Back
Exit
i
« to open the »MAIN MENU«.
and the picture appears. Repeat the search until the channel
you want appears on the screen.
i
« to finish the setting.
______________________________
3 to 6.