Special Settings; Setting Television Channels - Grundig VISION 6 Manual

SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
G G
0 - 9
Back
SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
Search
Back
SETUP
System BG
Channel C 03
Fine tuning 0
a s
Search
Program no P01
Store
Autoprogram
Store
Back
28

SPECIAL SETTINGS

Setting television channels

This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
Setting channels using the search
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »SETUP« with »P+« or »P-« and confirm with »OK«.
– The »SETUP« menu appears.
Exit
3
Select »Program no« with »P+« or »P-« and set the preset chan-
nel with »
4 Select »Search« with »P+« or »P-« and start the search with »
3
or »
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed in the »System« line.
Select »System« with »P+« or »P-« if the colour or sound are in-
Exit
correct. Select the setting required with »
5 Select »Store« with »P+« or »P-« and confirm with »
– The »Stored« message appears.
Note:
To set other television stations, repeat steps
6 Press »i« to finish the setting.
Exit
4 3
« or » «.
«.
------------------------------------------------------------------
4 3
« or » «.
4
3 to 5.
4
«
3
« or » «.