Settings; Changing Stored Channels; Setting Television Channels Automatically - Grundig DAVIO 14TVD 37-2502 TEXT User Manual

Language
English Svenska Romaneste
Deutsch Dansk Hirvatski
Francais Norsk âe‰tina
Italiano Suomi Slovenãina
Español Slovensko G. Shqipe
Portuguesa Polski
Ellenika Мaкедонски
Magyar
Türkçe Pycck Srpski
¹1
Nederlands
OK
Select
Country Selection
Arabic Iran Russia
Belgium Ireland Schweiz
Bulgaria Italia Slovenija
âeska Rep. Magyar Slovensko
Danmark Netherl. Suomi
Deutschl. Norge Sverige
Ellada Österreich Türkiye
España Polska U. K.
Franca Portugal Yugoslavia
Hrvatska Romania . . . . . . . .
OK Select
Main Menu
Picture
Program Table
Setup
Features
OK Select
i
Exit

SETTINGS

Setting television channels automatically

The television set is equipped with an automatic channel search
system.
You start the search and can then sort the television channels into
your order of preference.
100 preset positions are provided, to which you can assign televisi-
on channels from the antenna or from the cable connection.
You can also delete television channels from the channel list which
were found more than once or which have poor reception.
Switch on the television with » « on the television set, then
1
press »P+« on the remote control.
– The »Language« menu appears when the television is first
switched on.
apck
Hint:
If the »Language« menu does not appear on the screen, then
set it in accordance with the chapter on resetting all television
channels on page 34.
Select language with »P+«, »P-«, » « or » « and press
2
»OK« to confirm.
– The »Country Selection« menu appears.
Press »P+«, »P-«, » « or » « to select the country and
3
»OK« to confirm.
Note:
If your country is not displayed, select ». . . . . . . «.
4 Press »OK« to start the search.
– The »Setup« menu appears and the search begins. The auto-
matic search may last several minutes depending on the num-
ber of television channels received.
i
Exit
– After the search, the television switches to channel 1.

Changing stored channels

You can delete channels that have been stored more than once
during the automatic search. You can also store channels in a diffe-
rent preset position, change or enter the name of a channel as well
as skip channels.
Selecting the station list
Press »
1
– The »Main Menu« appears.
2 Select »Program Table« with »P+« or »P-« and confirm with
»OK«
– The »Program Table« menu appears.
Note:
Further operation is explained in the following sections.
______________________________________________
i
« to open the »Main Menu«.
9