Operating Modes; Built-In Program Mode - American DJ Mega Par Profile System User Instructions

Lighting equipment
Hide thumbs Also See for Mega Par Profile System:
Table of Contents

Advertisement

Mega Par Profile System
LED Display On/Off:
To make the display stay ON all of the time
press the MODE and UP buttons at the same time. To make the dis-
play turn OFF after 20 seconds, press the MODE and DOWN buttons
at the same time.

Operating Modes:

The Mega Par Profile System has six operating modes:
• Sound-Active mode - The unit will react to sound, chasing through the
built in programs.
• Built-In Program - There are 25 built-in programs to choose from.
• Auto Mode - This will run a automatic program.
• Static Color Mode - There are 32 colors to choose from.
• RGB Dimmer Mode - Choose one of the three colors to remain stat-
ic or adjust the intensity of each color to make your desired color.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the American DJ® Show Designer™.
Sound Active Mode:
In this mode the Mega Par Profile System will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until "SU.XX" is dis-
played. "XX" represents the sound sensitivity setting (0-31) currently
displayed. Use the UP or DOWN buttons to adjust the
sensitivity. "SU.01" is the least sensitive, "SU.31" is the most.
2. The fixture will now change via sound.

Built-In Program Mode:

1. Plug the fixture in and press the MODE button until "Pr.XX" is dis-
played. "XX" represents a number from 1-25. Use the UP or DOWN
buttons to scroll through the 25 programs. Once you have found
your desired program press the SET UP button.
2. Pressing the SET UP button will display "SP.XX". When this is dis-
played you can adjust the running speed of your desired program.
Use the UP or DOWN button to adjust the speed between "SP.01"
(slowest) and "SP.16" (fastest). Once you have set your desired run-
ning speed, you can press the SET UP button to to enter the Flash
(Strobe) mode.
3. After pressing SET UP, "FS.XX" will be displayed, this is Flash mode.
The Flash can be adjusted between "FS.00" (flash off) to "FS.99"
American DJ
- www.Americandj.com - Mega Par Profile System User Manual Page 7
©
®
Operating Instructions
Mega Par Profile System
(fastest flash).
Auto Run Mode:
1. Plug the fixture in and press the MODE button until "AUTO", is dis-
played.
2. Press the SET UP button so that "SP.XX" is displayed. When this is
displayed you can adjust the running speed of your desired program.
Use the UP or DOWN button to adjust the speed between "SP.01"
(slowest) and "SP.16" (fastest). Once you have set your desired run-
ning speed, you can press the SET UP button to to enter the Flash
(Strobe) mode.
3. After pressing SET UP, "FS.XX" will be displayed, this is Flash mode.
The Flash can be adjusted between "FS.00" (flash off) to "FS.99"
(fastest flash).
Color Select Mode:
1. Plug the fixture in and press the MODE button until "CL-X" is dis-
played.
2. There are 32 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
desired color you can activate strobing by pressing the SET UP but-
ton to enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
RGB Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When "r.XXX" is displayed you are in Red dimming mode. Press the
UP and DOWN buttons to adjust intensity.
3. When "G.XXX" is displayed you are in Green dimming mode. Press
the UP and DOWN buttons to adjust intensity.
4. When "b.XXX" is displayed you are in Blue dimming mode. Press the
UP and DOWN buttons to adjust intensity.
5. After you have adjusted the RGB colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the Flash (strobe) mode.
6. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.99" (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to create
American DJ
- www.Americandj.com - Mega Par Profile System User Manual Page 8
©
®
Operating Instructions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mega par profile sys

Table of Contents