System Requirements - Polycom CX600 Quick Start Manual

Hide thumbs Also See for CX600:

Connect Cables and Stand

System Requirements

The following are the minimum software and hardware requirements:

• Ethernet connection

• Access to AC power or Power Over Ethernet (PoE)

• Network access to Microsoft® Lync™ Server 2010 or greater

If a "Better Together" USB connection to a PC will be used, the PC must be equipped with Microsoft Lync 2010 or greater, and have a spare

USB port.

Setup

Connect the Ethernet cable as shown above. Connect the AC power supply as shown above, if not powered via the Ethernet cable.

Follow the instructions provided on the LCD display to sign in, conﬁgure and use the phone.

For more information, go to http://www.polycom.com/support/cx600, or contact your system administrator.

AC Power connection (Optional)

Use if Power over Ethernet

(PoE) is unavailable

Passthrough Ethernet connection to PC

(Optional) (Extra cable not included)

Type A USB Port

(For future use)

NOTE: To ensure adequate support, the stand

fully inserted into one of the slots on the

back of the phone.

USB Cable

(If used with a PC)