Hard Disk Connection; Lan Connector - Fujitsu Siemens Computers D1381 Technical Manual

Features

Hard disk connection

An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for
the ultra ATA/66or ultra ATA/100 mode.
Ê
Connect the end of the cable marked with blue to the system board.

LAN connector

This system board has an optional Intel 82550ET LAN controller which supports transfer speeds of
10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving
buffer (FIFO) and supports WOL function through Magic Packetä.
It is also possible to boot a device without its own boot hard disk via LAN. Here Bootix LAN BootP
and Intel PXE are supported.
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).
2
6 - English
1 = a connection exists (e.g. to a hub).
2 = Link Mode: the LAN connection is active.
1
WOL mode: a Magic Packet
received.
A26361-D1381-Z120-1-7419
TM
is being