Table of Contents
Advertisement
Add-on modules
Upgrading main memory
These slots are suitable for 128, 256, 512 and 1024 Mbyte DDR memory modules of the DIMM
format.
Memory modules with different memory capacities can be combined.
You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not
!
supported.
DDR-DIMM memory modules must meet the PC2100 specification.
Installing a memory module
2
Ê
Push the holders on each side of the memory compartment outwards.
Ê
Insert the memory module into the location (1).
Ê
At the same time flip the lateral holders upwards until the memory module snaps in place (2).
Removing a memory module
1
Ê
Push the clips on the right and left of the compartment outward (1).
Ê
Carefully remove the memory module from the compartment (2).
12 - English
2
1
A26361-D1387-Z120-1-7419
Advertisement
Table of Contents
