Troubleshooting Your Wireless Network - Gateway M320 User Manual

Troubleshooting your wireless
network
The wireless network does not connect.
If you ran the Windows XP Network setup wizard, your computer may
be set up to use a bridge even if you do not need one.
To remove the network bridge:
1
Click
opens. If your Control Panel is in Category View, click
and Internet Connections
window opens.
2
Click/Double-click
Connections window opens.
3
Click to select the
4
Click
box opens.
5
Click
appears in the Network Connections window.
The wireless utility icon shows that your wireless network is off, but
when you right-click the icon in the system tray and select "radio on"
the wireless network does not turn on.
■
Press F
hot key is the master on/off toggle.
You turned the wireless network on, but it takes a while to connect.
■ When the wireless network is turned on, it automatically scans for
available connections, which can take approximately 30 seconds to
complete.
, then click
Start
, then click
File
. When the bridge has been removed, it no longer
Yes
+F2 on the keyboard to turn the wireless network on. This
N
www.gateway.com
Control Panel
. The Network and Internet Connections
Network Connections
icon.
Network Bridge
. The Confirm Connection Delete dialog
Delete
. The Control Panel window
. The Network
Network
125