Starter (Choke) Knob; Seat - Yamaha XT500E Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
b
3

1. Starter (choke) knob "1"

Starter (choke) knob
St a r t e r ( c hoke) knob
Starting a cold engine requires a rich-
er air-fuel mixture, which is supplied
by the starter (choke).
Move the knob in direction a to turn
on the starter (choke).
Move the knob in direction b to turn
off the starter (choke).
a
1
1. Bolt (×2)
EAU04038
"1"

Seat

Seat
To remove the seat
Remove the bolts, and then pull the
seat off.
1
EAU00240
3-9
1
2
1. Projection (×2)
2. Seat holder (×2)
To install the seat
1. Insert the projections on the front
of the seat into the seat holders
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
NOTE:
Make sure that the seat is properly
secured before riding.