Installing The Apu Cooler - Gigabyte GA-F2A85X-UP4 User Manual

1-3-2 Installing the APU Cooler

Follow the steps below to correctly install the APU cooler on the motherboard.
Step 1:
Apply an even and thin layer of thermal grease on
the surface of the installed APU.
Step 3:
Turn the cam handle from the left side to the
right side (as the picture above shows) to lock
into place. (Refer to your APU cooler installation
manual for instructions on installing the cooler.)
Use extreme care when removing the APU cooler because the thermal grease/tape between the APU
cooler and APU may adhere to the APU. Inadequately removing the APU cooler may damage the APU.
Step 2:
Hook the APU cooler clip to the mounting lug on
one side of the retention frame. On the other side,
push straight down on the the APU cooler clip to
hook it to the mounting lug on the retention frame.
Step 4:
Finally, attach the power connector of the APU
cooler to the APU fan header (CPU_FAN) on the
motherboard.
- 15 - Hardware Installation