Installing The Apu Cooler - Gigabyte GA-F2A78M-D3H User Manual

1-3-2 Installing the APU Cooler

Follow the steps below to correctly install the APU cooler on the motherboard.
Step 1:
Apply an even and thin layer of thermal grease on
the surface of the installed APU.
Step 3:
Turn the cam handle from the left side to the
Use extreme care when removing the APU cooler because the thermal grease/tape between the APU
cooler and APU may adhere to the APU. Inadequately removing the APU cooler may damage the APU.
Step 2:
Hook the APU cooler clip to the mounting lug on
one side of the retention frame. On the other side,
push straight down on the APU cooler clip to hook
it to the mounting lug on the retention frame.
Step 4:
Finally, attach the power connector of the APU
motherboard.
- 15 - Hardware Installation