Gigabyte GA-F2A85X-UP4 User Manual page 44

& CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System FAN Speed
Displays current CPU/system fan speeds.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the CPU fan or system fan are not connected or fail. Check the
fan condition or fan connection when this occurs. (Default: Disabled)
& CPU Fan Control Mode
Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU
Auto
fan control mode. (Default)
Sets Voltage mode for a 3-pin CPU fan.
Voltage
PWM Sets PWM mode for a 4-pin CPU fan.
& CPU Fan Speed Control
Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.
Allows the CPU fan to run at different speeds according to the CPU temperature. You can
Normal
adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the CPU fan to run at slow speeds.
Silent
Allows you to control the CPU fan speed under the Slope PWM item.
Manual
Allows the CPU fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is
set to Manual. Options are: 0.75 PWM value /
& 1st/2nd/3rd System Fan Speed Control (SYS_FAN1~ SYS_FAN3 Connectors)
Allows you to determine whether to enable the system fan speed control function for the system fan
connected to the SYS_FAN1~SYS_FAN3 connectors and adjust the fan speed.
Allows the system fan to run at different speeds according to the system temperature. You
Normal
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the system fan to run at slow speeds.
Silent
Allows you to control the system fan speed under the Slope PWM item.
Manual
Allows the system fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the system fan speed. This item is configurable only when 1st/2nd/3rd System Fan
Speed Control is set to Manual. Options are: 0.75 PWM value /
BIOS Setup
C/140 F, 70 C/158
o o o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value /
o
- 44 -
F, 80 C/176 F, 90 C/194 F.
o o o o o
C.
o