Gigabyte GA-8I845G User Manual page 65

Basic 6 Channel Analog Audio Output Mode
Use the back audio panel to connect the audio
output without any additional module.
STEP 1:
Connect the front channels to "Line Out",the rear
channels to "Line In", and the Center/Subwoofer
channels to "MIC In".
STEP 2:
After installation of the audio driver, you'll find an
icon in the system area. Double click the icon
to select the function.
STEP 3:
Click "C-Media 3D Audio Configuration" and
then select "Main Setting". Select
and press OK.
icon
The function to
adjust speaker
volume.
- 65 -
Line Out
Line In
MIC In
Appendix