Table of Contents
Advertisement
Password Check
Setup
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
System
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.
CPU Hyper-Threading
This option appears only when the processor you install supports Intel
Enabled
Enable CPU Hyper-Threading feature. Please note that this feature is only
working for operating system with multiprocessors mode supported.
(Default value)
Disabled
Disable CPU Hyper-Threading.
Init Display First
Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.
PCI
Set Init Display First to PCI VGA card.
Onboard/AGP
Set Init Display First to onboard/AGP VGA card.(Default value)
Graphics Aperture Size
This option is available only when you use the onboard VGA function.
128MB
Set Graphics Aperture Size to 128MB. (Default value)
Disabled
Disable this function.
Graphics Share Memory
This option is available only when you use the onboard VGA function.
8MB
Set Graphics Share Memory to 8MB. (Default value)
1MB
Set Graphics Share Memory to 1MB.
®
- 33 -
Hyper-Threading Technology.
BIOS Setup
Advertisement
Table of Contents
