Edimax BR‐6478AC User Manual page 42

Static IP Address
Subnet Mask
Default Gateway
Address
MAC Address
DNS Address
DNS Address 1,2 & 3 Enter the DNS address(es) assigned by your ISP
Enable Dual‐WAN
Access
User ID
Password
L2TP Gateway
Connection ID
MTU
Connection Type
Idle Time Out
automatically enter your computer's MAC address.
Input the IP address assigned by your ISP here.
Input the subnet mask assigned by your ISP here.
Input the default gateway assigned by your ISP
here. Some ISPs may call this "Default Route".
If your ISP filters access by MAC addresses, enter
your computer's MAC address here. Click "Clone
MAC" to automatically enter your computer's MAC
address.
Select "Obtain an IP address automatically" or "Use
the following IP address". Check with your ISP if you
are unsure.
here.
Enable/disable dual WAN access. When you enable
dual WAN access, select an IGMP source and enter
a "Host Name" and "MAC Address".
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Input the L2TP gateway assigned by your ISP here.
Specify a reference name/ID for the connection.
Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1392.
Specify a connection type:
1. "Continuous": Connected all the time.
2. "Connect on Demand": Connect when you
initiate an Internet connection.
3. "Manual": Connect/disconnect manually using
the "Connect" and "Disconnect" buttons.
Specify the amount of time the router waits before
shutting down an idle connection. Only available
when "Connect on Demand" (above) is selected.
38