Gigabyte 6VM7-4E Series User Manual page 43

A.5 Notices :
1. In order for STR to function properly, several hardware and software requirements must
be satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification (provide more
than 720 mA 5V Stand-By current).
B. Your SDRAM must be PC-100 compliant.
2. Jumper JP9 is provided to connect to the STR LED in your system chassis. [Your
chassis may not provide this feature.] The STR LED will be illuminated when your system
is in STR sleep mode.
Suspend To RAM Installation
STR LED Connector External.
+
1
DIMM LED
36