Section 4 Setting Up - Netware - Axis StorPoint CD User Manual

Section 4 Setting Up - NetWare

Note:
AXIS StorPoint CD User's Manual
This section outlines the required configuration settings for running
the StorPoint CD in the Novell NetWare environment. It also
describes how to access CD-ROMs from the various NetWare clients,
and how to set up access restrictions.
This table outlines the maximum number of NetWare users,
depending on the amount of RAM memory being installed on your
StorPoint CD:
Max no of users 2Mbytes
NetWare 100
If you intend to use StorPoint CD in a multiprotocol environment,
proceed to the other relevant sections in this manual, namely:
Section 3 - Web browser (HTTP)
Section 5 - Microsoft and IBM Networks (SMB)
Section 6 - UNIX
To make the setup of the StorPoint CD as convenient as possible,
use the installation wizards available from the Web browser
interface. You will find a wizard for each network environment on
the Quick Installation page.
Section 4: Setting Up - NetWare
32Mbytes
1000
41