Setting Up - Microsoft And Ibm Networks (Smb) - Axis StorPoint CD User Manual

Section 5 Setting Up - Microsoft and IBM
Note:
AXIS StorPoint CD User's Manual
Section 5: Setting Up - Microsoft and IBM Networks (SMB)
Networks (SMB)
This section includes configuration information for the Microsoft and
IBM Networks environments. It also explains how to access CD-
ROMs using SMB clients, and how to set up SMB access restrictions.
This table outlines the maximum number of SMB users, depending
on the amount of RAM memory installed on your StorPoint CD:
Max no of users
NetBIOS/NetBEUI
NetBIOS/TCP/IP
If you intend to use StorPoint CD in a multiprotocol environment,
proceed to the other relevant sections in this manual, namely:
Section 3 - Web browser (HTTP)
Section 4 - NetWare
Section 6 - UNIX (NFS)
To make the setup of the StorPoint CD as convenient as possible,
use the installation wizards available from the Web browser
interface. You will find a wizard for each network environment on
the Quick Installation page.
2Mbytes 32Mbytes
100 200
100 300
61