Table of Contents
Advertisement
4. Click Apply for the settings to take effect.
The recorder can detect the presence of a DHCP server upon startup. It sets itself to use static IP
address if there is no DHCP server currently presented in the network. Its
on at the same time to assign IP addresses to cameras that are later connected to the network. You can
manually turn off the DHCP server function if you wish to use a separate DHCP server.
Change the recorder's IP address would require the recorder to restart.
Restart the device under "system Options" >> "Maintenance" for the settings to take effect.
server
36
DHCP
function is also turned
Advertisement
Table of Contents
