Advertisement
Hand Held Transmitter
Press
the button briefly in the end of the
transmitter, as shown, to turn the transmitter
on. There is a delay of about 2 seconds before
the self-test checks are complete and transmis-
sion begins.
Press the button for > 1 second to turn off.
Press the ribbed area on the cap body (A) and
then you can remove the cover by pulling in the
direction of (B). There are a variety of different
coloured covers, which may be changed to aid
identification.
Use the
between channel number and frequency.
SKM 3072
To change the MN1604 (PP3) battery, you
must first unscrew the capsule as shown.
Pressing
against
compartment cover will release the lid, allow-
ing the old battery to be removed.
Replace the battery, ensuring that the rubber
transit cover
has been
battery terminal, and that the correct polarity
has been observed. The transmitter terminals
have been designed to prevent operation
should the battery be inserted with the wrong
polarity.
Close the cover and replace the capsule to
ready the transmitter for operation.
Battery status is shown by a row of segments
as illustrated on the left.
8 segments
Full battery life
4 segments
Half battery life
1 segment
Nearly flat.
with the screen display.
You can always monitor battery life on the
EM3032 receiver
A
the
side of the battery
removed from the
alternates
B
Advertisement
