Citizen C500 Instruction Manual page 16

1. Number of dives: The number dives performed in a particular day. A
maximum of 9 dives can be counted. Counting is
initiated day by day.
2. Dive month and date: Date and month when diving is performed.
3. Maximum depth: The maximum depth that was reached in one diving.
4. Dive time: Dive time: total time when the diver remains deeper
than the depth of one meter. If the diver goes again
into the water deeper than 1 m (4 ft) within 10 minutes
after the diving depth becomes shallower than 1 m
(4 ft), the dive time counting resumes at the time
when the measurement is stopped and the accumula-
tive time is recorded successively.
Measurement is taken in units of seconds and up to
100 minutes at maximum. When the maximum is
reached, the measurement starts again with zero.
30
5. Dive start time: The time when a dive depth reaches 1 m (4 ft).
6. Dive end time: The time when the dive depth becomes shallower
than 1 m (4 ft).
7. Average depth: Average depth in one dive.
8. Minimum temperature: The minimum temperature recorded in one dive.
These log data are displayed as log (I), (II), (III) and (IV) separately.
31