Table of Contents
Advertisement
Installation
• Stick on the damp protection film as described in
the instructions on the rear side of the film (shorten
where necessary).
• Attach the side rails to the side panels of the furni−
ture as described in the separate assembly instruc−
tions.
• Place the appliance in front of the high cupboard,
and run the cable and hoses through the high cup−
board's bay so that they are neither kinked or squas−
hed.
• Align the dishwasher in the centre of the bay and
flush with the side panels, and where necessary, ad−
just to be flush at the front surface using shims.
• Carefully open the door of the appliance without
changing the settings of the appliance.
• Using the pre−drilled holes, screw the appliance to
the side panels of the furniture on both sides in the
upper inner area (see Detail A).
• Before screwing the appliance diagonally through
the base plate using two additional screws (always
pre−drill), it is advisable to protect the appliance
door from damage using suitable materials (e.g. the
cardboard packaging). In order to tighten these
screws, the door must be opened by approx. 45 de−
grees (see Detail B).
Technical Data
Dimensions
Height
Depth
Width
Capacity
Electrical connection
Motor rating during wash
Power of heating element
Overall power
Water supply pressure
AEG
30
75.9 cm
57.0 cm
54.6 cm
12 place settings
230−240V – 50Hz
140 W
2000 W
2150 W
Minimum 1bar
Maximum 10 bar
Detail A
Detail B
153 0409 25 / 09.99
Hide quick links:
Advertisement
Table of Contents
