Cleaning The Fine Strainer; Cleaning The Spray Arm Nozzles - AEG ÖKO−FAVORIT 55750 Instructions For Use Manual

Cleaning the fine strainer

The fine strainer must be cleaned from time to time:
1. Unlock the strainer by turning right.
2. Lift out the fine strainer and clean it under running
water with a brush.
3. Place the strainer in its holder.
4. Secure it by turning left until it locks (arrows).
Do not press the handle downwards.
If the strainer does not lock, the spray arm
nozzles may become blocked.
Cleaning the spray arm
nozzles
Regularly check the nozzles on the three spray arms for
blockages. If necessary, clean out the nozzles with a
fine wire or a fine pin and a strong jet of water.
Take care not damage the nozzle openings.
Roof spray arm
Remove the roof spray arm:
1. Loosen the securing screw (A) by turning to the left.
2. Pull the spray arm from the shaft.
3. Clean the spray arm and the securing screw.
4. Refix the spray arm with the securing screw (A) by
turning to the right.
1.
3.
2.
4.
A
21