Pc Health Status; Frequency/Voltage Control - ECS L4S5MG3 Manual

PC Health Status

On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds.
Phoenix – AwardBIOS CMOS Setup Utility
Shutdown Temperature
CPU Core Voltage
1.8V
3.3V
5.0V
+12V
StandBy 3.3V
StandBy 5.0V
Voltage Battery
CPU Temperature
System Temperature
CPUFAN Speed
CASFAN1 Speed
BAKFAN1 Speed
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Shutdown Temperature
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.

Frequency/Voltage Control

This BIOS menu enables you to set the clock speed and system bus for your
system. The clock speed and system bus are determined by the kind of proc-
essor you have installed in your system.
Phoenix – AwardBIOS CMOS Setup Utility
CPU Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/SDRAM/PCI Clock
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
PC Health Status
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults
Frequency/Voltage Control
[0 X]
[Enabled]
[Enabled]
[Default]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
45
Item Help
Menu Level
F7:Optimized Defaults
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults