Table of Contents
Advertisement
Timer start
The front panel switch beside the transport keys
allows the DV-RA1000 to start playback of the
loaded disc automatically when power is supplied.
Selecting the input source
The input source for recording can be selected as
described here:
1 Press the
key, and use the wheel to
MENU
select
. Press
SYSTEM SETUP
2 Use the wheel to select
.
ENTER
3 Use the wheel to select from the following
screen:
Figure 3.11: Selecting the input source
4 First, choose between
the
parameter.
INPUT
If you choose the analog option, remember
that both the balanced XLR inputs and the
unbalanced RCA inputs are active together,
but you should only use one set.
5 If you are recording to CD, or to a single- or
dual-sampling frequency PCM DVD, select
CD-R
COAXIAL / AES/EBU
DIO
n/a
MODE
The selected input is shown on the home
display.
.
ENTER
INPUT SELECT
. Press
ANALOG
and
DIGITAL
on
Single-frequency
DVD (44.1 / 48)
COAXIAL / AES/EBU
n/a
Table 3.12: Digital input source options
Set the switch to the
either from the start of the disc, or from the last posi-
tion if resume playback is selected (see "Resume
playback" on page 19).
the
parameter (digital I/O) as either
DIO
EBU
or
COAXIAL
(S/PDIF). The appropriate digi-
tal terminals will also be used for output of the
digital signal.
If you are recording to a quad-frequency
DVD, this option is not available, and
is the only option available.
If you are recording to a DSD DVD, the signals
will always be input and output through the
BNC connectors. The
chooses the format in which the audio is sent
and received:
DSD-RAW
bit stream, or
SDIF-3
available). Consult the documentation for
your other equipment to find out what format
is most suitable for your setup.
6 Finally, in the case of double-frequency DVD
with
AES/EBU
selected as the input/output con-
nector, there is an option to select double-wire
or double-speed as the I/O format (
The
COAXIAL
option allows double-speed mode
only, and quad-frequency is double-speed +
double-wire mode, and cannot be changed.
7 Press
to confirm your settings and
ENTER
return to the
SYSTEM SETUP
Dual-frequency
Quad-frequency
DVD (88.2 / 96)
DVD (176.4 / 192)
COAXIAL / AES/EBU
AES/EBU only
COAXIAL – double-
Double-speed +
speed only
double-wire only
AES/EBU – double-
wire or double-speed
TASCAM DV-RA1000 Owner's Manual
3 – Basic principles
position to start playback,
PLAY
AES/EBU
parameter here
DIO
, which is the raw DSD
(no other options are
MODE
menu.
DSD DVD
SDIF-3 or RAW DSD
n/a
21
AES/
).
Advertisement
Table of Contents
